Warning : Cannot operate on its own. Must be used together with Control Unit II (Sold separately) Warning : Sensor Sets (sold separately) are required to display oil temperature, water temperature, oil pressure, fuel pressure and exhaust temperature. Defi-Link Display Defi-Link Display is a multipurpose monitor which provides information on speed, oil temperature, water temperature, oil pressure, fuel pressure, and exhaust temperature to automobile users. Defi-Link Display can be connected to Defi-Link Meters and Defi-Link Meter BFs by using the DAISY CHAIN wiring system. Defi-Link Control Unit II or Defi-Link Control Unit is necessary to operate Defi-Link Display. Defi-Link Display is applicable only for 12V vehicles. Defi-Link Meter BFs shown in the picture is not included in the kit. Main Product Features The display uses OLED(organic light emitting diode). OLED is an advanced display which is self light emissive, high contrast, high response, low power consumptive, and large view angle. It uses optimal technology for instant readability without afterimages of flicker even when seen from the passenger's seat. Real-time digital information includes speed, oil temperature, water temperature, oil pressure, fuel pressure and exhaust temperature. When the RPM signal wire is connected to Defi-Link Control Unit II or Defi-Link Control Unit, 2 warning levels can be set in addition to the warning setting made by Control Unit II or Control Unit, enabling the setting of a total of 3 warning levels(Tachometer Triple Warning Mode). When the water temperature sensor is connected, the warm-up condition can be monitored. A graphic animation plays after the ignition is turned on or off(Opening Mode/Ending Mode). An easily recognizable graphic on each setting screen helps guide easy setting of warnings for Defi-Link Meters and Step Graph(Setting Assistance function). The Warning LED lights when the set warning value is exceeded for oil temperature, water temperature, exhaust temperature and engine RPM. The Warning LED lights when measured value drops below the set warning value for oil pressure and fuel pressure. Trouble locations are shown by graphics so that connection problems can be quickly corrected(Self-Diagnosis function). The structure of the mounting base allows height and angle adjustment so that it can match the shape of the instrument panel. The Defi-Link Indicator(sold separately) can be connected to the display. |
|
Links |